Sanyo 9.1 - Manual (Page 21)

19
English
SCREEN CAPTURE
Individual windows on your computer’s monitor display can be saved in the
camera.
Activating the Screen Capture mode
1 Start your computer, and use the supplied USB interface cable to
connect your camera to the computer.
h Connect the camera’s USB terminal to the computer’s USB connector.
2 Turn on the camera (see page 28 in the camera’s instruction
manual).
h The USB Connection Screen appears on the camera’s monitor.
3 Select “COMPUTER” and press the SET button.
h The screen to select the computer connection mode appears.
4 Select “SCREEN CAPTURE” and press the SET button.
OK CANCEL
USB CONNECTION
CANCEL
MOBILE VIEWER
PRINTER
COMPUTER
To USB connector
on the computer
Supplied dedicated
USB interface cable
To USB terminal on
the camera