Sanyo 9.1 - Manual (Page 12)

English
10
For Windows XP/Vista users
Mounting your camera
1 Set the camera to the card reader mode (page 8).
h The card is recognized (mounted) as a disk, and the [XACTI (E:)] (or
[XACTI_INT (E:)] in case of the camera’s internal memory) window
opens.
* The drive name (E:) may be different on your computer.
2 Select an action.
h Select the desired procedure from the [XACTI (E:)] (or [XACTI_INT
(E:)] in case of the camera’s internal memory) window.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1 Left-click on the icon for safely removing hardware.
h A list appears showing the devices connected to the computer’s USB
connector.
h Close the window.
2 Left-click on the camera drive (E:).
h The camera can now be disconnected.
* The drive name (E:) may be different on your computer.