Sony FE40L - Manual (Page 18)

18
Connecting the Projector
For details, refer to the operating
instructions supplied with your computer.
To connect a Macintosh computer equipped
with a video output connector of a type having
two rows of pins, use a commercially available
plug adaptor.
To connect a computer (Digital) or
video equipment (Digital)
A HDMI-DVI-D cable (not supplied)
B HDMI cable (not supplied)
Be sure to use the HDMI cable with an HDMI
logo.
This HDMI connector conforms to Ver. 1.2a.
The HDMI connector of this projector is not
compatible with DSD (Direct Stream
Digital) Signal.
This section describes how to connect the
projector to a VCR.
For more information, refer to the
instruction manuals of the equipment you
are connecting.
To connect to a video or S video
output connector
A Audio connecting cable (not supplied)
For stereo equipment use both the L and R
jacks.
For monaural equipment use the L (MONO)
jack only.
B Video cable (not supplied) or S-Video cable
(not supplied)
Note
Note
Side
Computer to DVI-D output
connector
to HDMI connector DVD player
Connecting a VCR
VCR
to S
video
output
Side
to audio
output
(R)
to video
output
to audio
output (L)