Sharp QS-2770H - Manual (Page 9)

– 7 –
“ ” position: An answer is rounded down.
EXAMPLE: 10.005 ÷ 5 = 2.001
Set decimal to 2,
10.005
5
→ 2.01
Set decimal to 2, 5/4
10.005
5
→ 2.00
Note: The decimal point floats during successive calculation by the use of
or key.
In floating decimal point system, an answer is rounded down.
DECIMAL SELECTOR:
Presets the number of decimal places in the answer.
In the “F” position, the answer is displayed in the floating decimal system.
PAPER FEED KEY:
When pressed, advances the paper roll.
Note: You can also pull the paper manually.
RIGHT SHIFT KEY:
Operation of this key in entered numbers or calculated results shifts the
number one digit to the right together with the decimal point. Used for one
digit correction.
GRAND TOTAL KEY:
Prints and clears the “GT” memory contents.
NON-ADD/SUBTOTAL KEY:
Non-add – When this key is pressed right after an entry of a number in the
Print mode, the entry is printed on the left-hand side with the
symbol “#”.
This key is used to print out numbers not subjects to calculation
such as code, date, etc.
Subtotal – Used to get subtotal(s) of additions and/or subtractions. When
pressed following the or key, the subtotal is printed with
the symbol “
◊” and the calculation may be continued.
By pressing this key even in the Non-print mode, the displayed number
is printed with the symbol “P”.
TOTAL KEY:
Prints the total of addition and subtraction with the symbol “ ”. This key also
serves as a clear key for the calculation register and resets an error
condition.