Sharp QS-2770H - Manual (Page 7)

– 5 –
number entered following or key and before (or
, , , , ) key will obey the decimal setting. This
is useful for invoicing.
EXAMPLE: Set A/+-
• -A/x to A/x
Set decimal to 2
Enter
7 Tape prints 7.
×
3 0.03 =
0.21
Note: Use of the key will automatically override the A/x
mode.
Addition and subtraction:
The A/x mode functions same as the A/+ mode.
“
•” position:
Neutral
ITEM COUNT MODE SELECTOR:
“IC±” position: 1) The counter will count the number of times that the
key has been pressed in addition.
Note:
• Each time the
key is used in subtraction, 1
will be subtracted from the count.
• The count is printed when the calculated
result is obtained.
• Pressing of the
, , , or key
clears the counter.
2) When the grand total mode selector is in the ON
position (GT), the counter will count the number of
times that the calculation results have been stored in
the grand total memory. To print and clear the count,
press the
key.
3) The memory item counter will count the number of
times that the key has been pressed in the addition.
Note:
• Each time the
key is used in the
subtraction, 1 will be subtracted from the
count.
• The count is printed when the memory is
recalled.
• Pressing of the key clears the counter.
“IC+” position: 1) The counter will count the number of times that the
or has been pressed in addition and subtraction.
Note:
• The count is printed when the calculated
result is obtained.