To perform an image alignment – Smart Technologies Unifi 45 User Manual
Page 23
99-00881-20 A0
Before Installing Your Unifi 45 Projector Retrofit Kit
15
Use the following procedure to obtain a rectangular image that is slightly smaller than the interactive
whiteboard’s screen.
NOTES
•
We recommend that you project a computer image while performing the following steps. If you do not have
a computer, use the projector’s MENU (see previous instructions) to change the background to blue so that
you can see the full projector image clearly.
•
Complete the procedures on the preceding pages before performing this alignment procedure.
1.
Move your SMART Board interactive whiteboard left or right to center the image on the interactive
whiteboard horizontally.
2.
Adjust the thumbscrew on top of the projector until the image is horizontal.
To perform an image alignment