Savin 3725 - Manual (Page 75)

69
4. Troubleshooting
Loading Paper in the Main Paper Tray
If there is no paper in the main paper
tray, the
B indicator on the control
panel lights.
Use the following procedure to load
the paper.
Important
❒ When loading paper, be careful
not to pinch your fingers inside the
machine.
❒ Before loading paper, make sure
that the machine is not outputting
a copy or received document.
Note
❒ Regarding paper types and sizes
that can be used, see p.128 “Pa-
per”, .
❒ If you want to change the paper
size, see p.62 “Changing the Paper
Size Setting”,
.
AAAA
Make sure that the main paper
tray is not being used.
BBBB
Pull out the main paper tray until
it stops.
CCCC
Push the metal plate down, and
then square the paper and load it
in the tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ If paper is left in the main paper
tray and you add paper, a mis-
feed might occur.
Note
❒ Shuffle the paper before setting
it in the tray.
DDDD
Push the main paper tray in until
it stops.
StellaF1EN-3_FM.book Page 69 Monday, November 12, 2001 11:38 AM