Savin 3725 - Manual (Page 22)

Getting Started
16
1
13. {{{{On Hook Dial}}}} key
Use to dial a number from the numeric
keypad without having to lift the hand-
set.
14. {{{{Energy Saver/Clear Modes}}}} key
Energy Saver: Hold down 2 seconds to
select or deselect energy saver mode.
When the machine is not used for a fixed
period, the machine goes into energy sav-
er mode automatically.
Clear Modes: Press to clear any selected
settings and return the machine to its pre-
vious condition.
15. {{{{Copy}}}} key
Press to copy the original currently load-
ed in the feeder.
16. Quick Dial keys
Use to dial numbers with a single touch
or to enter letters and symbols. Also use
for the Group Dial function.
17. Quick Dial Key Flip Plate
Flip down to access Quick Dials {{{{01}}}} to
{{{{15}}}}, and flip up to access Quick Dials
{{{{16}}}} to {{{{30}}}}.
Note
❒ Make sure the plate is flat against the
control panel.
18. {{{{User Tools}}}} key
Press to enter User Tools mode. These
tools allow you to customize the default
settings.
19. {{{{Help}}}} key
Press the Help key when you want to
print a help list.
20. {{{{Resolution}}}} key
Press to switch between Standard, Auto,
Detail
and Fine. When the indicator is
not lit, Standard is selected.
21. {{{{Halftone}}}} key
Select halftone when faxing or copying
photographs or illustrations with fine
gradations. Also can be used for color
originals.
22. Status Indicators
These indicators keep you informed
about the current status of the unit.
• hAlarm
When the alarm indicator flashes,
check the display and read the mes-
sage to identify the problem (such as a
paper jam or open cover).
• 0Communicating
Lights during fax transmission or re-
ception.
23. {{{{Memory Trans.}}}} key
Press this key to switch between Memory
Transmission and Immediate Transmis-
sion modes.
When the indicator is not lit, Immediate
Transmission is selected, and when the
indicator is lit, Memory Transmission is
selected.
24. Number keys
Use to dial fax numbers or enter the num-
ber of copies.
25. {{{{Start}}}} key
Press to start all tasks.
26. {{{{Clear/Stop}}}} key
Clear: Deletes one character or digit.
Stop: Interrupts the current operation
(transmission, scanning, copying or
printing).
StellaF1EN-3_FM.book Page 16 Monday, November 12, 2001 11:38 AM