Savin 3725 - Manual (Page 33)

Canceling a Memory Transmission
27
2
Canceling a Memory Transmission
Before the Start Key is
Pressed
AAAA
Press the {{{{Energy Saver / Clear
Modes }}}} key.
Note
❒ When you have already set the
original, you can also cancel the
transmission by removing the
original from the machine.
While the Original is Being
Scanned
AAAA
Press the {{{{Clear/Stop}}}} key.
The machine will stop storing the
original and the data will not be
sent.
During Transmission
Use this procedure to cancel a trans-
mission after the original has been
scanned.
Note
❒ If transmission finishes while you
are carrying out this procedure, it
will not be canceled.
❒ If you cancel a message while it is
being sent, transmission is halted
as soon as you finish this proce-
dure. However, some pages of
your message may have already
been sent and will be received at
the other end.
AAAA
Press the
{{{{Job Information}}}} key,
and confirm that " 1. Cancel TX /
RX " is displayed.
The Information menu is shown.
BBBB
Press the
{{{{OK }}}} key.
StellaF1EN-3_FM.book Page 27 Monday, November 12, 2001 11:38 AM