Suzuki 2008 Reno User Manual

Page 34

1-22

85Z14-03E

according to the instructions provided
by the child restraint system manufac-
turer. Be sure to attach the top strap to
the corresponding anchor located
directly behind the child restraint.

5) When routing the top strap, be sure to

pass it between the head restraint and
the rear seatback as shown. (Refer to
“Head Restraints” in this section for
details on how to raise or lower the
head restraint.)

6) Make sure that cargo does not interfere

with routing of the top strap.

Lower Anchorages and Top Teth-
ers for Children (LATCH System)

Your vehicle has a LATCH system. You’ll
find anchors (A) in the rear outside seat
positions.

To assist you in locating the lower anchors,
each seating position with the LATCH sys-
tem has a circular disk on the seatback at
each lower anchor position.

The disks are located near the base of the
two rear outside seating positions.

Canada only

86Z004

WARNING

Each top tether bracket is designed
to anchor only one child restraint.
Attaching more than one child
restraint to a single bracket could
cause the anchor to come loose or
even break during a crash. A child or
others could be injured if this hap-
pens. To help prevent injury to people
and damage to your vehicle, attach
only one child restraint per bracket.

N5U1003A

N4U1009A

This symbol indicates the
presence of a lower connector
system on a child restraint
system or booster cushion.

Child Restraints: