Suzuki 2008 Reno - Manual (Page 15)

1-3
SEATS AND RESTRAINT SYSTEMS
85Z14-03E
Do not have your a seatback reclined when
your vehicle is moving.
Head Restraints
75F123
Head restraints are designed to help
reduce the risk of neck injuries in case of
an accident. Adjust the head restraint to
the position which places the center of the
head restraint closest to the top of your
ears. If this is not possible for very tall pas-
sengers, adjust the head restraint as high
as possible.
Pull up the head restraint in order to adjust
the position upward.
Push in the release button and press
downward on the head restraint in order to
adjust the position downward.
To remove the head restraint, pull the head
restraint all the way up. Then push in the
release button and lift the head restraint
from the guide sleeve.
Replace the head restraint and reset it in
the original position before driving.
The rear seat head restraints may also be
adjusted.
Push in the release button and move the
head restraint to the desired position.
WARNING
All seatbacks should always be in a
fairly upright position when driving,
or seat belt effectiveness may be
reduced. Seat belts are designed to
offer maximum protection when seat-
backs are in the fully upright posi-
tion.
L3U1009A
WARNING
• Never drive the vehicle with the
head restraints removed.
• Removed or improperly adjusted
head restraints can result in seri-
ous head and neck injuries in case
of collision.
• Do not attempt to adjust the head
restraint while driving.
N4U1010A
Front Seats: