Suzuki 2008 Reno - Manual (Page 171)

5-27
SERVICE AND APPEARANCE CARE
85Z14-03E
Rear Sidemarker Lamps
To replace a rear sidemarker lamp bulb:
1) Insert your hand into the inside of the
rear bumper and hold the socket.
2) Rotate the rear sidemarker lamp bulb
socket counterclockwise.
3) Pull the rear sidemarker bulb socket out
of the rear bumper.
4) Pull the old bulb straight out from the
bulb socket.
5) Push a new bulb straight into the
socket.
6) Reverse the steps 1 through 3 to rein-
stall the bulb socket.
Replacement Bulbs Windshield Wiper Blade
Replacement
Windshield wiper blades should be
inspected at least twice a year for wear or
cracking. If the wiper blades become brittle
or damaged, or make streaks when wiping,
replace the wiper blades for optimum driv-
ing visibility. Replacement blades come in
different types and are removed in different
ways.
Here’s how to remove the Shepherd’s
Hook type:
1) Pull the windshield wiper arm away
from the windshield.
2) Press the retaining clip (A) and pull the
wiper blade off the arm.
3) Install a new blade by reversing the
steps 1 and 2.
Bulb
Wattages
x
Quantity
Bulb
No.
High-Beam
Headlamp
55W x 2 H1
Low-Beam
Headlamp
55W x 2 H1
Front Turn Signal
Lamp
28/8W x 2 2357NA
Stop Lamp/
Tail Lamp
27/8W x 4 1157
Rear Turn Signal
Lamp
27W x 2 1156NA
Backup Lamp 27W x 2 1156
License Plate
Lamp
5W x 2 168
Center
High-Mounted
Stop Lamp
5W x 5 168
Rear Sidemarker
Lamp
5W x 2 168
Bulb Replacement:
Windshield Wiper Blade Replacement: