Suzuki 2008 Reno - Manual (Page 14)

1-2
SEATS AND RESTRAINT SYSTEMS
85Z14-03E
Driver Seat Height Adjuster
To adjust the height of the driver’s seat
cushion, turn the knobs located on the out-
board side of the seat cushion.
Turn the front knob to adjust the height of
the front portion of the seat cushion. Turn
the rear knob to adjust the height of the
rear portion of the seat cushion.
Manual Lumbar
Your vehicle may have manually operated
lumbar support for the driver’s seat.
To adjust the front seat lumbar support,
use the lever located on the outboard side
of the seatback.
Push the lever down to adjust the support
for the lower part of the seatback. Pull the
lever up to return the support to its original
position.
Reclining Seatbacks
To adjust the seatback angle, lift the lever
located on the outboard side of the seat
and move the seatback to the desired posi-
tion.
Release the lever and push rearward on
the seatback to make sure it is locked.
Pull up on the lever without pushing on the
seatback and the seatback will move to an
upright position.
N4U1003A
N4U1004A
N4U1005A
Front Seats: