Samsung HDR-CX6EK - Manual (Page 16)

16
qs RESET button
To initialize the settings (Reset), press
RESET to initialize all the settings,
including settings for date and time.
qd LCD screen/touch panel
To record in mirror mode, open the LCD
screen 90 degrees to the camcorder (1),
then rotate it 180 degrees to the lens side
(2).
qf (HOME) button (p. 20)
qg Zoom buttons
Press for zooming in/out.
During playback, you can magnify still
images from about 1.1 to 5 times the
original size (Playback zoom).
• When you touch the screen during playback
zoom, the point you touched will be displayed in
the center of the displayed frame.
qh Memory Stick Duo slot (p. 10)
qj Access lamp
When the access lamp is lit or flashing,
your camcorder is writing or reading data
on the “Memory Stick PRO Duo.”
qk (Film Roll Index) button (p. 13)
ql (VIEW IMAGES) button (p. 13)
wd EASY button (p. 12)
wf Speaker
Sound comes out from the speaker while
playing back.
wg NIGHTSHOT switch
To record in dark places, set the
NIGHTSHOT switch to ON (
appears).
wj Hook for a shoulder belt
Attach the shoulder belt (optional).
wk Internal microphone
Records sound on movies.
Sound picked up by the internal
microphone is converted to 5.1ch surround
sound and recorded.
wl Flash
Flashes when using the flash.
e; Lens (Carl Zeiss Lens)
ea Camera recording lamp
Lights up in red during recording. Flashes
when remaining “Memory Stick PRO Duo”
space or battery power is low.
es Remote sensor/Infrared port
Receive the signal from the Remote
Commander.
ed Tripod receptacle (Bottom surface)
Attach the tripod (optional: the length of the
screw must be less than 5.5 mm (7/32 in.))
to the tripod receptacle using a tripod
screw.
ef BATT (battery release) lever (p. 7)