beautypg.com

Sony MZ-NH900 User Manual

Page 97

background image

97

DC IN TOO
HIGH

• Voltage of the power supply is too high (The supplied AC power adaptor or

the recommended car battery cord is not used).
, Use the supplied AC power adaptor or the recommended car battery

cord.

DISC FULL

• The remaining recording time on the disc is 12 seconds (SP stereo), 24

seconds (LP2 stereo or monaural), 36 seconds (LP4 stereo), or less.
, Replace the disc.

D-L READY

• MD Simple Burner is now ready to record an audio CD to the disc in the

recorder using Simple mode. (Refer to “Software Operation” section.

EJECT DISC
OK

• The recorder has finished communicating with the computer and it is safe to

eject the disc from the recorder or disconnect the dedicated USB cable.

End

• The recorder reached to the end of the disc while playing or pressing >.

ERROR

• There is an internal malfunction in the system.

, Restart the operation by doing steps 1 to 3 on page 95.

ERROR XX

• There is an internal malfunction in the system.

, Restart the operation by doing steps 1 to 3 on page 95. If the message

appears again, please consult your nearest Sony dealer.

FORMAT
ERROR DISC

• A disc with a format that the recorder does not support was inserted.
• A disc formatted on the computer was inserted.

, Insert a standard MD or a disc used in Hi-MD mode.

, When formatting a disc on the computer, make sure to use the

SonicStage software.

GROUP FULL • You tried to create a 256th group on a disc used in Hi-MD mode or 100th

group on a standard disc.
, You can create only up to 255 groups (on a disc used in Hi-MD mode) or

99 groups (on a standard disc) on a disc. Keep the group number within
255 or 99.

HOLD

• The recorder is locked.

, Slide HOLD against the arrow to unlock the recorder (page 18).

IN MENU

• You pressed a key on the remote control while selecting a menu on the

recorder.

• You pressed a key on the recorder while selecting a menu on the remote

control.

LOW
BATTERY

• Batteries are weak.

, Charge the rechargeable battery or replace the dry battery (page 17).

MEMORY
OVER

• You tried to record with the recorder placed where it receives continuous

vibration.
, Put the recorder on a stable place, and start recording again.

NAVIGATION

• You pressed a key on the remote control while selecting the Main Play Mode

on the recorder.

NO BATTERY • Recharging was attempted with a non-rechargeable battery inserted.

, Insert a rechargeable battery and start the charging process again.

NO
BOOKMARK
TRACK

• You selected bookmark play without setting bookmarks.

, Set bookmarks (page 46).

Message

Meaning/Remedy