Sundance Spas 850 - Manual (Page 37)

11.3 Cleaning The Hot Tub Interior
To preserve the sheen of your hot tub's surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect on
the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Sundance Dealer.
Regardless of the cleanser used, use extreme care to assure that no soap residue
is left on the surface. This could cause severe sudsing when the hot tub is
refilled. Your Sundance Dealer offers a specially formulated surface sealant
which aids in cleaning the hot tub surface and adds a protective coating to
enhance the luster of the surface. This product should also be occasionally
applied to the stainless steel grab rails and accents in the hot tub to help pre-
serve their appearance.
11.4 Pillow Care
Remove and clean the headrest pillows as
needed with soapy water using a cloth or
soft-bristle brush. To maintain water resis-
tance and luster, apply a quality vinyl condi-
tioner once a month. Always remove the
pillows when adding chemical shock treat-
ment to the hot tub water. The pillows can
be returned to the hot tub when the sanitiz-
er reading drops below 5 ppm.
IMPORTANT: Never attempt to remove the pillows by pulling on them!
The pillows utilize a bolt-on design that prohibits removal without tools.
To remove pillows:
1. Grasp center pillow insert (A) with finger tips and gently pry outward
from pillow base (C).
2. Use a standard screwdriver to loosen and remove mounting bolts (B)
from pillow base.
3. Assemble in reverse order after cleaning. DO NOT overtighten pillow
mounting bolts!
11.5 Maintaining The Wood Cabinet
With time and exposure to the elements, the wood on your hot tub will
tend to lose its new appearance. Protecting or reviving the wood surfaces is
a fairly simple process. Light sanding with fine-grit sandpaper will help
smooth any roughness and regular applications of a penetrating wood
Page 33