Sundance Spas 850 - Manual (Page 33)

The factory default start time is 12:00AM (Midnight). The default duration
is 24 hours. To make adjustments, press the sensor labeled CYCLE five
times to enter the circulation pump programming mode. The LCD screen
will display ADJUST Circ. At this time the system is ready to accept your
changes.
• Press the SELECT sensor once. The previously programmed start time
appears on the LCD display.
• Press UP or DOWN sensors to adjust the start time in 30-minute
increments.
• Press the SELECT sensor to program duration.
• Press UP or DOWN sensors to program the duration time in 2 hour
increments.
• Press DISPLAY to make the circulation pump programming characters
disappear from the screen and the main display return to showing the
water temperature. If no sensor is pressed within 30 seconds, the
screen will automatically return to the standard water temperature
display
Please Note: The circulation pump automatically activates if the spa
requires heat regardless of the programmed start time and duration.
10.4 Locking Filter Cycles
You may keep the filter cycle programs from being inadvertently altered by
electronically “locking” them. To accomplish this, simply press CYCLE then,
within 30 seconds, press DISPLAY, MODE and UP, within five seconds each.
A padlock symbol will appear on the screen. In this state, the status of the
cycle programming may be checked, but may not be altered. To unlock the
filter cycle programming to make changes, simply press DISPLAY, MODE
and DOWN within five seconds each.
10.5 Panel Lock
To help prevent unauthorized use of your hot tub, the Sentry controls incor-
porate a unique panel locking system which disables the controls on the
panel.
To Lock The Panel: Press the DISPLAY, MODE, and UP sensor pads,
in order, within five seconds. A padlock symbol will appear on the LCD
screen. With the panel locked, none of the components can be turned on
and the only settings that can be adjusted are the standard/economy oper-
ating mode and changing the time of day. All automatic hot tub functions
will operate normally.
Page 29
LOCKED