Sundance Spas 850 - Manual (Page 25)

Page 21
C. Mute
Press mute button (2) once to mute audio output (“Mute” flashes on
display). To restore audio output, press mute button a second time, or
rotate volume knob.
D. Program Selection
Press source button (4) to cycle through available program sources as fol-
lows: Tuner - CD - Tuner. If a source is unavailable (e.g. no CD inserted),
that source will not appear on the display.
E. Adjusting Bass Level
Press audio button (20) until display reads “BAS.” Rotate volume knob to
desired setting. A display of “C 0” indicates center, -2 to -12 indicates
bass cut, and +2 to +12 indicates bass boost. Note: unit returns to vol-
ume mode if volume control is not rotated for 3 seconds.
F. Adjusting Treble Level
Press audio button (20) until display reads “TRE.” Rotate volume knob to
desired setting. A display of “C O” indicates center, -2 to -12 indicates tre-
ble cut, +2 to +12 indicates treble boost. Note: unit returns to volume
mode if volume control is not rotated for 3 seconds.
G. Adjusting Balance
Press the audio button (20) until display indicates “BAL.” Rotate volume
knob to desired setting. A display of “C O” indicates center, L1 to 15 indi-
cates left balance, R1 to 15 indicates right balance. Note: unit returns to
volume mode if volume control is not rotated for 3 seconds.
Optional SunSound TM Stereo Receiver Radio Operation
A. Adjust Fader
Press audio button (20) until display reads “FAD.” Rotate volume knob to
desired setting. A display of “C O” indicates center, “R” 1 to 15 indicates
rear fade, “F” 1 to 15 indicates front fade. Note: unit returns to volume mode
if volume control is not rotated for 3 seconds.
B. Display Clock
Press set button (9) to toggle display between clock and radio modes.
When clock mode is selected, the current time displays whenever the unit
is left undisturbed.