Sharp Aquos LC 37HV4U - Manual (Page 55)

54
Useful adjustment settings
Press MENU and the PC MENU screen
displays.
1
2
Press a/b to select “Input Signal” and then
press SET/ENTER.
3
Press c/d to select “Setup”.
PC MENU
Setup Option
Fine Sync.
Input Signal
Auto Sync.
[English]
[Standard]
Language
Picture Flip
Press a/b to select the desired input signal
on the display.
4
PC MENU
Setup
Input Signal
640 x 480
848 x 480
Example
RECEIVER
POWER
TV/SAT/DVD
RETURN MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
A B C D
POWER
MENU
GUIDE
INPUT VOL ؁ VOL ؀
INFO
Input signal (for PC input mode)
• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 6 input signals listed above.
Noise clean
Produces a clearer video image.
1
2
3
TV MENU
Option
Noise Clean
Input Select
Audio Out
Cool Climate
[Fixed]
[Low]
[Auto]
[Off]
Press MENU and the TV MENU screen
displays.
Press c/d to select “Option”.
Press a/b to select “Noise Clean”, and then
press SET/ENTER.
• Some items may be grayed out. They are not
selectable.
Press a/b to select the desired level, and
then press SET/ENTER.
4
TV MENU
Option
Noise Clean
Off
High
Low
RECEIVER
POWER
TV/SAT/DVD
RETURN MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
A B C D
POWER
MENU
GUIDE
INPUT VOL ؁ VOL ؀
INFO 720g400
848g480
1280g768
640g400
640g480
1024g768
NOTE
• “Noise Clean” is not selectable when channel display
shows an input resolution of 480P, 720P or 1080I.