Samsung SCC-C6403 User Manual

Page 12

2-8

2-7

1. [Figure 1] Install the structure on the

ceiling.
(Refer to Installation reference

for the Length of the structure)

* Built in by the builder of the structure

3. [Figure 2] Assemble the

BRKT-ANCHOR on the ceiling
and screw the 4 bolts in.

[Figure 2]

2. Make a hole in the ceiling where the camera will be installed.

(The hole should be about ø185)

4. [Figure 3,4] Connect the various cables to the CAMERA ADAPTER.

(See page 2-4)

[Figure 4]

[Figure 3]

Installing the Camera

[Figure 1]

5) CEILING MOUNT ADAPTOR (SADT-100CM)

This adaptor is used for installing the indoor housing or the outdoor
housing for the SmartDome Camera to a concrete ceiling.

6) POLE MOUNT ADAPTOR (SADT-100PM)

This adaptor is used for installing the WALL MOUNT ADAPTOR
(SADT-100WM) to a pole that is over 8 cm (2.76 in.) in diameter.

00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 2-7