SMC Networks SMCWUSBT-G - Manual (Page 22)

Chapter 3: Utility Configuration
15
Action Tab
Use the Action menu to access the Utility tools:
1. Enable/Disable Radio: Enable or disable the
RF Signal on all Atheros station reference
designs.
2. Enable/Disable Tray Icon: Enable or disable
the tray icon .
3. Manual LEAP Login: Log in to LEAP manually,
if LEAP is set to manually prompt for user name
and password on each login.
4. Reauthenticate: Re-authenticate to a
LEAP-configured access point.
5. Exit: Exit the Utility application.
Options Tab
To change the display settings, choose Options > Display Settings from the menu.
Display Settings:
1. Signal Strength Display Units: Set the units
used when displaying signal strength:
percentage (%) or dBm.
2. Refresh Interval: Use the up/down arrows to
set the display refresh interval in seconds.
3. Data Display: Set the display to cumulative or
relative:
„ Relative: displays the change in
statistical data since the last update.
„ Cumulative: displays statistical data
collected since opening the profile.