Southbend P24C-CC - Manual (Page 29)

P LATINUM S ERIES S ECTIONAL R ANGE I NSTALLATION
I NSTALL AND O PERATIONS M ANUAL 1185836 R EV 3 (07/06) P AGE 29 OF 80
S TEP 5: A TTACH F LUE R ISER AND S HELF A SSEMBLIES
Install the flue riser(s) using the following procedure (as shown in Figure 16).
1. Attach any salamander broilers and flue-riser-mounted cheese melters to appropriate sections following the
installation procedure in the manuals for those options.
2. Slide each flue riser down onto the brackets projecting from the back of the corresponding section(s) of the
sectional range. Secure the flue riser to the brackets with the four provided 1/4-20x3/4 hex-head bolts, flat
washers, and lockwashers. Also, secure the bottom edge of the flue riser to the top rear edge of the sectional
range using the provided #10 sheet metal screws.
3. If access to the interior of the flue riser is necessary to make gas connections, make those connections at this
time.
Figure 16
Installation of Flue Riser