Star Micronics LC-6211 - Manual (Page 25)

Setting the printing speed 19
Setting the printing speed
❏
Make sure the printer is on-line ( ON LINE indicator is lit).
❏
Press the control panel’s LINE FEED button to switch between NLQ
( NLQ indicator is lit) and draft ( NLQ indicator is not lit) printing.
NLQ printing provides high quality, but is somewhat slower. Draft printing
is quicker, but the quality is not as good as NLQ.
Tear-off function
This procedure feeds fanfold paper to a position where it can be torn off easily.
❏
Make sure the printer is on-line ( ON LINE indicator is lit).
❏
Press the control panel’s SET/EJECT/PARK button.
❏
Tear off the paper.
❏
When you resume printing, the printer reverse feeds the paper to its former
position.