Star Micronics LC-6211 - Manual (Page 13)

Connecting to a power outlet and turning power on and off 7
❏
By hand, move the cartridge holder to the center position of the paper guide
where there is a cutout to allow easy installation and removal of the ribbon
cartridge.
Important!
Never try to move the print head while the printer is plugged into a power
outlet. Doing so can damage the printer. If you have just used the printer, let
the print head cool for a few minutes before you touch it.
❏
Using your thumb and forefinger to squeeze the two tabs on the ribbon
cartridge towards the center, carefully remove the cartridge from the holder.
❏
Use the procedure under “Installing the ribbon cartridge” on page 5 to
install a new cartridge.
Connecting to a power outlet and turning power on and off
❏
Plug the power cord of the printer into a standard power outlet whose
voltage matches the power rating noted on the label affixed to the bottom of
your printer.