Star Micronics DP8340RC - Manual (Page 19)

– 15 –
CODE ESC a n
(1B)
H
(61)
H
n
FUNCTION n-line feed
OUTLINE After printing the data in the current line, n lines are fed by this
code. The value of n ranges from 1 to 120.
CODE ESC C n
(1B)
H
(43)
H
n
FUNCTION Sets page length in lines
OUTLINE This code sets the length of a page to n lines. The value of n
ranges from 1 to 120. On initialization, the page length
default condition will be 42 lines. The line feed pitch is one-
sixth inch.
CODE ESC Nn
(1B)
H
(4E)
H
n
FUNCTION Sets bottom margin in lines
OUTLINE Upon receiving this code, the bottom margin is set to n lines.
0
n 120; Default Value n = 0
CODE ESC O
(1B)
H
(4F)
H
FUNCTION
Cancels bottom margin.
OUTLINE Upon input of this code, bottom margin setting is cleared.
CODE FF
(0C)
H
FUNCTION Form feed
OUTLINE The FF code prints the data in the current line and transports
the paper to the start of the next page.