Sharp CV-P09LX - Manual (Page 22)

1
3
COOL MODE
Drainage nozzle
Stopcock
E-20
Install the exhaust hose (See Page16), turn
the drainage nozzle to the CLOSE position,
and check the drainage nozzle is covered
with the stopcock.
1 Press the MODE button to select COOL
mode.
COOL DEHUM FAN VENT
2 Press the POWER button to start op-
eration.
• The red OPERATION lamp on the unit will
light.
3 Press the TEMPERATURE button to set
the desired temperature.
• The temperature can be set within the range
of 64°F to 86°F.
4 Press the FAN button to set the de-
sired fan speed.
AUTO QUIET LOW HIGH
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn
off.
1
4
2
3
"CLOSE" position