Samsung SP-L331 - Manual (Page 51)

Using 3-5
3-5-4. Option
Network By connecting a LAN cable between the PC and projector, you can use the following supplementary
functions.
On your PC, you can check the projector's conditions (lifespan of the lamp, operation error,
temperature) and remotely control the projector's power On/Off, brightness, and sound On/Off .
• : -
•
: Automatically allots the IP address, Subnet mask and Gateway.
: Allows you to manually enter the IP address, Subnet mask and Gateway manually.
• : Allows you to enter the server PC's IP address.
Remote Control : Navigate between options using / buttons. Input the values using /
buttons.
To use the network function, must be set to .
If the network connection fails, enter the IP address of the server PC under .
Reset Using this function, you can reset various settings to the factory default settings.
• : Changes the settings to the factory defaults.
• : Resets the filter time.
MENU DESCRIPTION
Language You can select the language used for the menu screen.
Menu Option • : You can move Menu Position up/down/left/right.
• : You can set the translucency of the menu.
•
---
• : You can set the display time of the menu.
•
<5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>-
Sound Adjusts the right and left audio balance and equalizer of the 3W stereo speaker embedded in the pro-
jector.
• -<100Hz>-<300Hz>-<1kHz>-<3kHz>-<10kHz>
MENU DESCRIPTION