Aabbcc – Samsung SCX-4216F User Manual

Page 139

ROUBLESHOOTING

8.20

Background

scatter

Background scatter results from bits of toner distributed on the
printed page.
• The paper may be too damp. Try printing with a different

batch of paper. Do not open packages of paper until
necessary so that the paper does not absorb too much
moisture.

• If background scatter occurs on an envelope, change the

printing layout to avoid printing over areas that have
overlapping seams on the reverse side. Printing on seams can
cause problems.

• If background scatter covers the entire surface area of a

printed page, adjust the print resolution through your
software application or the printer properties.

Misformed
characters

• If characters are improperly formed and producing hollow

images, the paper stock may be too slick. Try a different
paper. See “Paper Specifications” on page B.6.

• If characters are improperly formed and producing a wavy

effect, the scanner unit may need service. For service,
contact a service representative.

Page skew

• Ensure that the paper is loaded properly.
• Check the paper type and quality. See “Paper Specifications”

• Ensure that the paper or other material is loaded correctly

and the guides are not too tight or too loose against the
paper stack.

Curl or wave

• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high temperature and

• Turn over the stack of paper in the paper tray. Also try

rotating the paper 180° in the tray.

Condition

Suggested solutions

AaBbCc