Sharp VL-NZ100S - Manual (Page 26)

Preparation
Preparation
15
Setting the Date and
Time
Available modes:
TAPE-CAMERA, CARD-CAMERA
Example: Setting the date to 2 June 2003 (2. 6.
2003) and the time to 10:30 am (10:30).
Note:
• Before performing the steps below, make sure
that the lithium battery has been installed (see
page 14).
SET button
1
Hold down the Lock button
and set the Power switch to
CAMERA.
2
Press the MENU button until the menu
screen appears.
3
Press the SET button.
C L O C K S E T
D I S P L A Y
S E T T I N G
1 2 H 2 4 H /
R E T U R N
1 2 0
0 0 0 :
0 2 . 1 .
Lock button
4
Press l or m to select “2” (day), then
press the SET button.
5
Press l or m to select “6” (month),
then press the SET button.
6
Press l or m to select “2003” (year),
then press the SET button.
7
Press l or m to select “10” (hour), then
press the SET button.
8
Press l or m to select “30” (minute),
then press the SET button.
• The internal clock now starts operating.
9
Press the MENU button to turn off the
menu screen.
Note:
• If the date and time have been set, the SETTING
1 screen (T) appears in step 2. Select
“SETTING” in the CLOCK SET screen (P) using
the Operation button and SET button.
0 0 0 :
1 2 0 0 2 . 2. SE T T I NG
0 0 0 :
6 2 0 0 2 . 2. SE T T I NG
0 0 0 :
SE T T I NG 6 2 0 0 3 . 2.
1 0 0 0 :
SE T T I NG 6 2 0 0 3 . 2.
1 0 3 0 :
SE T T I NG 6 2 0 0 3 . 2.
Power switch
MENU button
Operation button
VL-NZ100H-009-018 02.2.14, 9:58 AM 15