11 setting your station id, Step1, Setting up the machine – Sony MFC-240C User Manual
Page 14: Name
Setting Up the Machine
12
STEP1
11
Setting your station ID
You should store your name and fax number to be
printed on all fax pages that you send.
1
Press Menu.
2
Press 0.
3
Press 3.
4
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a “+” for
international codes, press l. For example, to
enter the UK dialling code “+44”, press l, 4, 4
and then the rest of your number.
Fax:+44XXXXXXXX
5
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Name:_
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press
to move the
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press
or
to move the cursor
under the incorrect character, press Clear/Back.
6
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step
For details, see Entering Text in Appendix C
of the User's Guide.
12
Setting tone or pulse dialling
mode (not available for New
Zealand)
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
1
Press Menu.
2
Press 0.
3
Press 4.
4
Press a or b to choose Pulse (or Tone).
Press OK.
5
Press Stop/Exit.
Press
key
One
time
Two
times
Three
times
Four
times
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M
N
O
6
7
P
Q
R
S
8
T
U
V
8
9
W
X
Y
Z