Sirius Satellite Radio SDST5V1 - Manual (Page 18)

18
Vehicle Installation
Step 2: Install the Vent or Dash Mount
Depending on your situation, you can either choose to use the Dash Mount or the
Vent Mount .
Installing the Dash Mount:
CAUTION! The adhesive used on the Dash Mount may be difficult to remove . Do not
install this mount on leather surfaces (contact your vehicle dealer if you are unsure
about your dash surface), and make sure the air temperature is at
least 60°F (15°C) during installation . If it’s not at least 60°F, turn on
the heater in your vehicle to bring the temperature up to 60°F .
1 Locate a flat surface for the Dash Mount . Make sure
there is ample room for the PowerConnect Vehicle Dock
and Starmate 5 when installed .
2 Set the orientation of the Dash
Mount before adhering it . Loosen
the knob and adjust the adhesive
foot for the location you selected
in “Step 1: Choose a Location for
Your Radio” on page 16:
• Option 1 & Option 3 should be oriented
as I .
• Option 2 should be oriented as II .
3 Attach the Dash Mount to the
PowerConnect Vehicle Dock using the
provided screws .
I
II