Sharp Aquos LC 46BD80UN - Manual (Page 59)

57
Appendix
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: f4°F to e140°F (f20°C to e60°C)
Problem Possible Solution
• Still image playback or frame
advance playback does not
work properly.
• Frame advance playback on discs other than DVD-RW/R (VR format) may not work
properly.
• Some commercially available BD-VIDEO and DVD-VIDEO discs are not compatible
with still image playback or frame advance playback.
• On BD-VIDEO discs, frame reverse playback does not work.
• Fast forward/reverse (search)
does not work properly.
• Depending on the disc and the scene being played, the speed of fast forward may
not be as described in this manual.
• Search across different titles is not possible. Except for audio CDs, the TV will
switch to playback mode for BD and DVD discs.
• Slow playback does not work
properly.
• At the end of a title, slow playback will be canceled.
• Slow playback across different titles is not possible.
• With BD-VIDEO discs, reverse slow playback is not possible.
• Cannot play DVD discs recorded
on other equipment.
• Discs that were not fi nalized on the other equipment may not play in this TV. Finalize
the disc in the recorder that was used to create it.
• Discs in formats not supported by this TV, such as discs recorded with a high-
defi nition digital video camera cannot be played in this TV.
• Discs created on a computer may not play in this TV.
• The disc is automatically ejected. • Make sure that region code on the disc matches that of this TV.
• Make sure that the disc is playable.
• Make sure that the disc is loaded properly. The disc should be loaded with the
playback side facing the back of the TV.
• Take out the disc and clean it.
• Disc cannot be ejected. • Turn power off the main power, and then turn power on again.
After the power indicator has come on, press
(EJECT) on the TV or EJECT on
the remote control unit.
• If the above steps do not resolve the problem, please contact your dealer or an
authorized service center.
• The TV makes a snapping
sound when starting playback or
loading a disc.
• The TV may sometimes make a snapping sound when starting playback if it has not
been operated in a while.
These sounds are not malfunctions of the TV but are normal operating conditions.
• Pressing MENU does not bring
up a menu.
• If a message appears, follow the instructions in the message.
• A MiniDisc (MD) recorder is
connected to the TV via a digital
link. When recording songs
from a CD onto MD, the track
numbers are incorrect.
• If the pauses between tracks on the CD are short, the track numbers on the MD
may be different.
• In cases such as when tracks were specifi ed using an on-screen menu, the track
numbers on the MD may be different.