Sharp AR-PB8 - Manual (Page 5)

D. Option
(1) LCD kit
AR-PA1
Key
6 pcs.
(LINE, MENU, ITEM,
← , → , ENTER)
Lamp 2 (DATA, ONLINE)
Display 20 digits × 2 lines
∗ When installing the AR-PB8 to a model which is not equipped with
the LCD panel, the LCD kit (AR-PA1) must be installed to.
a. LCD message
Status LCD display Content
Online Online
AUTO
Auto select to
emulation
PCL PCL
PS2 ∗ A PS2 ∗ A
HEX HEX
Error
Data Loss
Error
Press ENTER
Memory Full Press ENTER
Paper Out
Tray 1
When the paper
feed tray is
selected to other
than AUTO. Tray 2
Tray 3
Tray 4
Bypass Size>
Tray
When the paper
feed tray is
selected to AUTO.
Check Panel
Toner empty
Drum replacement
Cover open
Service call error
Clear Paper
Path Paper jam
Paper exit tray full
User
setting
Main Menu
Copies
Printing of the set
quantity is made.
Resolution
Printing at the set
resolution is made.
Smoothing
Smoothing function
setting.
Toner Save
Toner save mode
setting
Page Protection
Setting of page
protection function
2-Sided Printing ∗ B
Setting of duplex
function and
binding direction
Paper Source Tray select
Paper Size Paper size select
Orientation
Setting of print
direction
Emulation Emulation setting
Network
Menu
∗ 1
Set IP Address
IP address setting
is made.
Set Subnet Mask
Subnet Mask
setting is made.
Set Default
Gateway Default Gateway
setting is made.
Status LCD display Content
User
setting
Network
Menu
∗ 1
Enable TCP/IP
Enable/Disable
TCP/IP
Enable Netware
Enable/Disable
Netware
Enable EtherTalk
Enable/Disable
EtherTalk
Reset to Defaults
Reset Print Server
Card to default
PS2 Menu
∗ 2, ∗ A
Print PS2 Error
Setting of printing in
case of PS Error
Interface
Menu
I/O Time Out
If data reception is
not completed
within the set time,
it is judged as a
time out error.
Test Printing
Menu
Configuration Page
Configuration page
is printed.
PCL6 Font Page
PCL6 Font page is
printed.
PS2 Font Page
PS2 Font page is
printed
∗ A.
∗ 1 When installing the network Interface card.
∗ 2 When installing the AR-PS1.
b. LED display
ON LINE light
Extinguished
Indicates that the printer is
off-line and data cannot be
transferred or printed. Make
settings from the operation
panel in this mode. Note,
however, that you cannot make
settings if the “Data Remaining”
message is displayed.
Lit
Indicates that the printer is
on-line and data can be
transferred and printed.
DATA light
Extinguished
Indicates that there is no data
being received or processed.
Lit
Indicates that the printer is
receiving or processing print
data.
Blinking
Indicates that there is print data
remaining in memory that has
not yet been printed.
c. Operation keys
LINE key
Changes between the on-line and off-line
modes.
When the printer is on-line, it can receive data
from the computer with which it is connected.
When the printer is off-line, you can use
operation panel keys to make print settings.
Note, however, that you cannot make settings
if the "Data Remaining" message is displayed.
MENU key
Used to show setting menus on the display in
sequence.
∗
ITEM key
Used to show the setting items of the selected
menu in sequence.
∗
Left arrow key
Right arrow key
Used to change the value of any item. ∗
ENTER key Used to enter a new value.
∗ Invalid when the printer is on-line.
AR-PB8
1 – 3