Sharp AR-PB8 - Manual (Page 19)

[5] SIMULATION
1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
Clear key → Interruption key → “0” key → Interruption key → Main
code → Start key → Sub code → Start key
2. Cancelling the simulation mode
When the all clear key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and
the screen returns to the sub code entering display.
3. Contens of Simulations
Main
code Sub
code
Contents Details of operation
Initial
value
Set range
22 18 Printer counter display Used to display the current printer counter value. ∗ 1
24 9 Printer counter clear Used to clear the printer counter. ∗ 2
67 14 Printer Flash ROM The machine enters the version up mode of the printer PWB flash ROM.
Data Download For details, refer to the printer PWB flash ROM version up procedure
described later.
∗ 1: Each counter display method
To display 123456: 123 (0.75 sec) → Blank (0.35sec) → 456 (0.75 sec) → Blank (1.0 sec) → repetition
∗ 2: Display after clearing each counter
000 (0.75 sec) → Blank (0.35sec) → 000 (0.75 sec) → Blank (1.0 sec) → Repetition
AR-PB8
5 – 1