Sharp AR-PB8 - Manual (Page 11)

B. Copier shield plate disassembly
• Remove screws, and remove the shield plate.
C. PWB fixing plate installation
• Fix the plate with screws.
D. Printer PWB installation
• Fix the printer PWB with screws.
• Before introduction of the Expansion memory, the PS PWB, or
the network PWB, this procedure must be performed.
E. Mother board installation (Packed together with
the LCD kit.)
• Insert the connectors and fix them, then connect the connec-
tors of the copier to them.
F. Shield plate installation
• Fix the shield plate with screws.
AR-PB8
3 – 2