Samsung ML-4050ND - Manual (Page 103)

Using Your Printer with a Macintosh
33
9
Using Your Printer with
a Macintosh
Your machine supports Macintosh systems with a built-in USB
interface or a 10/100 Base-TX network interface card. When
you print a file from a Macintosh computer, you can use the
PostScript driver by installing the PPD file.
N OTE : Some printers do not support a network
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User’s Guide.
This chapter includes:
• Installing Software for Macintosh
• Setting Up the Printer
• Printing
Installing Software for
Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
Install the Printer driver
1
Connect your machine to the computer using the USB
cable or the Ethernet cable.
2
Turn on your computer and the machine.
3
Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4
Double-click the CD-ROM icon on your Macintosh
desktop.
5
Double-click the MAC_Installer folder.
6
Double-click the MAC_Printer folder.
7
For Mac OS 8.6~9.2, double-click the Samsung LBP
Installer Classic icon.
For Mac OS 10.1 or higher, double-click the Samsung LBP
Installer OSX icon.
8
Click Continue.
9 Click Continue.
10
Click Install.
11
After the installation is finished, click Quit.
Uninstalling the Printer driver
Uninstall is required if you are upgrading the software, or if
installation fails.
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the MAC_Printer folder.
5
For Mac OS 8.6~9.2, double-click the Samsung LBP
Installer Classic icon.
For Mac OS 10.1 or higher, double-click the Samsung LBP
Installer OSX icon.
6
Click Continue.
7
Click Continue.
8
Select Uninstall and then click Uninstall.
9
When the uninstallation is done, click Quit.