Sony PEGA-VR100K - Manual (Page 19)

19
Basic Hookups and Settings
1
Connect the AC power adapter to the DC IN connector of
the Video Recorder.
2
Connect the AC cord to the AC power adapter ( 1 ), then
plug the AC cord into a wall outlet ( 2 ).
Notes
• The clock blinks in the front panel display when you turn on the Video Recorder
for the first time.
• For details on setting the clock, refer to “Step 5: Setting the Clock” on page 20.
When installing the Video Recorder vertically
You can install the Video Recorder vertically when you attach the supplied
stand to either side of the Video Recorder.
When you attach the stand, lay the Video Recorder down on one side and
slide the stand into the slot on the other side of the Video Recorder.
Note
Attach the stand after connecting all cords.