Sony PEGA-VR100K - Manual (Page 15)

15
Basic Hookups and Settings
3
Use the supplied antenna cable to connect the splitter’s
other output jack to the VHF/UHF IN jack on the Video
Recorder.
Hookup 3: Connecting to a cable box
Use this hookup for a cable box.
1
Use an antenna cable (not supplied) to connect the signal
source coming from your wall to the single (input) jack of the
splitter (not supplied).
2
Use an antenna cable (not supplied) to connect one of the
splitter’s two output jacks to the VHF/UHF IN jack on your
TV.
VHF/UHF
IN
When connecting a TV and VCR
Antenna cable (supplied)
Splitter (not supplied)
Antenna cable
(not supplied)
Antenna cable (not supplied)
Signal source
For details on the connections above,
refer to the operating instructions of
your VCR or TV.
Video Recorder
VCR
Wall
TV
To VHF/UHF IN
To VHF/UHF IN
continued