Sony VAIO Digital Studio PCV-RX270DS - Manual (Page 48)

VAIO Digital Studio™ User Guide
48
Topic: My i.LINK
®
device does not appear on the desktop
1 Turn off and disconnect your device.
2 Reconnect your device.
3 Then turn on the power.
Topic: My connected printer doesn't function after the computer resumes from
a power saving mode
When this occurs, follow the procedures below to reset the printer connection:
1 Right-click the My Computer icon on the desktop, and then select
Properties.
2 Click the Device Manager tab.
3 Select Refresh, and then click OK.
4 The printer should now function properly.
Topic: How do I enable my Ethernet interface?
1 Right-click My Computer on the desktop and select Properties.
2 Click the Device Manager tab.
3 Select “Realtek RTL8139 (A/B/C/8130) PCI Fast Ethernet NIC” under the
Network Adapters category.
4 Click Properties.
5 Click Enable Device and then click OK.
6 Click Close.
Topic: How do I install a printer?
✍
Always check the printer manufacturer's website for the latest drivers for Windows®
Me before proceeding. Some printers do not function properly without updated
drivers for Windows Me.