beautypg.com

Additional tasks, Receiving calls (continued) – Sony SPP-A2480 User Manual

Page 34

background image

Basics

34

US

To

Adjust the cordless handset
volume

Put a call on hold

Switch to another call
(“call waiting” service*)

Receive a call by only picking
up the cordless handset from
the charger, without pressing
(TALK)(Quick talk)

* You need to subscribe to this service from your telephone company.

Additional tasks

Note
If there is an incoming call during intercom conversation, intercom call will be
disconnected, and both the base phone and the cordless handset will ring.

Tip
To inform you of an incoming call, the display shows “** RINGING **” even
when you set the RING switch on the cordless handset to OFF.

If you have subscribed to the Caller ID service;
• the caller’s number and/or name appears on the display when you receive a

call (see page 68) or when another call comes in by “call waiting” service.

• the name stored in the one-touch dialing or Phone Directory appears on the

display if the call matches the number stored on ONE-TOUCH DIAL buttons
or in the Phone Directory (memory match function; see page 68).

• the ringer sound changes to a higher tone if the call matches the number VIP

stored on ONE-TOUCH DIAL buttons or in the Phone Directory (memory
match function; see page 68).

To turn the ringer off

Set the RING switch on the bottom to OFF.

“[RINGER OFF]” appears on the display.

The cordless handset won’t ring. You can still make
calls, and also receive calls if another telephone
connected to the same line rings to inform you on
incoming calls. You can also receive an intercom call.

Do this

Set the VOL switch to H (high), M (middle) or L
(low).

Press (HOLD). “HOLD” appears on the display.
Press (HOLD) again or pick up the cordless
handset from the charger (When Quick talk is
set to “USE”; see below) to resume the
conversation.

Press (CALL WAITING/FLASH).
Press (CALL WAITING/FLASH) again to return to
the first caller.

Press (PROGRAM). Turn Jog Dial to choose
“QUICK TALK”, then press Jog Dial.
Turn Jog Dial to choose “USE”, then press Jog
Dial.

Receiving calls (continued)

RING switch