Sony SPP-A2480 - Manual (Page 13)

Getting Started
13 US Getting Started
Entering the area code
When you use this phone for the first time, or move to an area that has a
different area code, you must enter the area code. Otherwise, you cannot use
some functions of this phone and the Caller ID functions.
This is also necessary because the phone must be able to select an area code to
properly dial a call from the Caller ID list.
Depending on your region, enter the 3-digit area code as follows:
Case 1.
If 7-digit dialing (no area code) is accepted for local calls in your area, see “To enter
your home area code” below.
If you live in an area where calls from or to other local areas can also be made by 10-digit dialing
(area code + number), you can register up to 5 local area codes with this telephone to take
advantage of this system. See “To enter the local area code (For 10 digits phone number users)”
on page 15.
Case 2.
If 10-digit dialing (area code + number) is required for all local calls in your area, see
“To enter the local area code (For 10 digits phone number users)” on page 15.
Entering the area code is only possible on the base phone.
To enter your home area code
1
Press (PROGRAM).
2
Turn Jog Dial to choose “BASE
SETTINGS”, and then press Jog
Button (ENTER).
3
Press Jog Button (ENTER).
Step 4
continued
BASE SETTINGS
GO BACK
AREA CODE
PHONE SERVICES
CLOCK
AREA CODE
GO BACK
HOME :
LOCAL 1:
LOCAL 2:
(ERASE)
Jog Button
(ENTER)