Sony SPP-A2480 - Manual (Page 18)

Getting Started 18 US
Note
Do not allow more than 20 seconds to elapse during the operation procedure.
Tip
When you select “[GO BACK]”, you can return to the previous set display by
pressing Jog Button (ENTER).
To set up the Long Distance Saver function
Many telephone companies and service providers nowadays offer low-
rate long distance calls separate from your standard long distance
provider. Such services are usually initiated by dialing an access
number prior to the long distance call itself.
The Long Distance Saver function enables you to dial the access
number of these special long distance service companies by pressing
just (LONG DIST. SAVER). After setting up the access number and
activating the button function in the menu, you only need to press
(LONG DIST. SAVER) for dialing the access number of your special long
distance carrier.
In order to use this function, you must first activate the button function
by memorizing the access number of your choice in the menu and by
setting the long distance menu function to “ACTIVE”
The long distance menu is preset to “INACTIVE”, no preset access
number is registered.
To set up the access number
1
Perform steps 1 and 3 on page 17.
2
Turn Jog Dial to choose “LONG DISTANCE”, and then
press Jog Button (ENTER).
3
Turn Jog Dial to choose “ACCESS NUMBER”, and then
press Jog Button (ENTER).
4
Enter the access number using the dialing keys.
5
Press (PROGRAM).
6
Turn Jog Dial to choose “YES” to activate
(LONG DIST. SAVER), and then press Jog Button (ENTER).
You hear a long confirmation beep.
Step 5: Setting up the phone services (continued)