Sony SPP-A2480 - Manual (Page 26)

Basics 26 US
1
Pick up the cordless handset
from the charger.
2
Press (TALK) and wait until
“TALK” appears on the display
and the display also shows the
talk time in hours, minutes and
seconds.
The dialing keys light up.
You then hear a dial tone.
“CORDLESS HANDSET IN
USE” appears on the display of
the base phone.
If you hear five short error
beeps and “OUT OF RANGE”
appears on the display, move
closer to the base phone.
3
Dial the phone number.
4
When you’re done talking, press
(OFF) or replace the cordless
handset on the charger.
The display turns off.
To make a call after checking the phone number
You can dial the phone number before pressing (TALK) or
(LONG DIST. SAVER). If you make a mistake when dialing the phone
number, press (ERASE) to erase the number.
(*TONE)
(HOLD)
Basics
Making calls
VOL switch
(LONG DIST. SAVER)
I (HEADSET)
jack
(ERASE)
(CALL WAITING/FLASH)
(REDIAL/PAUSE)