Sony SPP-A2480 - Manual (Page 11)

Getting Started
11 US Getting Started
Preparing the battery pack
Charge the battery pack for more than 12 hours before you start using
your cordless handset.
1
Slide open the battery
compartment lid of the cordless
handset.
2
Connect the battery connector
with correct polarity (black wire
goes on lower side and red wire
goes on upper side).
3
Hook the cords and insert the
battery pack. Then close the lid.
4
Connect the AC power adaptor
to an AC outlet and place the
cordless handset on the charger .
The CHARGE lamp on the
charger lights up when the
cordless handset is properly
seated on the charge terminals
of the charger. Charge the
battery pack for more than 12
hours so that the battery is fully
charged. The CHARGE lamp
remains lit even after charging
is completed.
continued
Step 3
Black
Red
BP-T24
Hook
CHARGE lamp
To an AC outlet
Front side