Samsung C4235(P) - Manual (Page 15)

15
ENG
5. If the camera operates normally, the following screen will be
displayed for 5 seconds and then disappears.
* ROM VER and EEP VER may change without notice.
6. The requirements for RS485 control is as follows :
- Signaling Speed: 9600 bps
- Data Bit : 8 bits
- Stop Bit : 1 bit
- Parity Bit : none
SAMSUNG.. PROTOCOL
ADDRESS.. 0
TYPE.. RS-485,.HALF
BAUD.RATE.. 9600
ROM.VER.. 1.000
EEP.VER.. 1.000
LENS.. OK.
SCC-C4333_Eng-EURO.indd 15 2007-11-12 오전 10:18:24