Samsung C4235(P) - Manual (Page 10)

10
2).When.the.voltage.is.supplied.to.both.ports
Function
Code
ENTER/AF *2 HOME RETURN *
ZOOM Port FOCUS Port ZOOM Port FOCUS Port
A -6V -6V +6V +6V
B -6V +6V +6V -6V
C +6V -6V -6V +6V
D +6V +6V -6V -6V
*.2.:..For.short.voltage.supply.during.MENU.OFF,.executes.
ONEAF.and.for.more.than.2.second
*.3.:..For.more.than.2.second.long.voltage.supply,.moves.to.the.
PRESET.0(HOME).position.
2
SETUP Switch
This switch is used to set the function or property. When this switch
is pressed for at least 2 seconds, the Setup menu appears.
n
[Left/Right] movement or changing the displayed value: By
pressing this switch left or right, you can move left or right on
the menu or change the displayed value.
n
[Up/Down] movement: By pressing this switch up or down, you
can move up or down on the menu.
n
Setting: When you press this switch in the menu, the selected
value or function is confirmed. To enter a submenu, press this
button.
3 Power Display LED.
When the power is normally connected, the red LED lights.
4 Video OUT Jack.
This is connected to the Video Input jack of the monitor and it
outputs the Video signals.
5
Power Connection Jack
.
This is connected to the Power cable.
SCC-C4333_Eng-EURO.indd 10 2007-11-12 오전 10:18:23