Samsung MCD-SM45 - Manual (Page 9)

Briefly press the Last Memory/SBS button to activate the SBS function
or hold it longer to activate the Last Memory function.
SBS/Last Memory function
16 15
ESP/Album function
Press the +10 button.
• Press the +10 button briefly while playing
back a CD. Playback will skip 10 tracks.
Example : If you want to select track 43 during playback of track 15, press the +10
button three times, and then press the button three times.
•MP3-CD playback : Press and hold the ESP/Albm button longer to select “ Album
Off ”. The button is now enabled as the +10 button.
Main Unit
ESP prevents the music being interrupted by
vibration and shock.
ESP (Electronic Skip Protection) function
ESP Press the ESP/Album button.
•CD Playback: Press the ESP/Album
button to turn this function on and off.
(During playback of an MP3-CD,
ESP will always be active whether or
not the ESP/Album button is pressed.)
•The player buffers up to 120 seconds of MP3 and 45 seconds of audio CD data; hence even if the
data flow is interrupted, data is read from memory so that the sound signal remains undisturbed.
•While listening to music, the Anti-S.T (Anti-Shock Time) Buffer Level is automatically
saved.
+10 button
SBS (Super Bass Sound) function
SBS
Press the SBS button.
•Each time the SBS button is pressed,
SBS will be turned on and off alternately.
This function allows you to maximise
your listening enjoyment with dynamic
reproduction of low-pitched sounds such
as beating drums or galloping horses.
Last Memory function
When MP3-CD playback is
selected again after your
CD player has been stopped or
turned off, this function allows
playback from the start of the
track that you last listened to.
•Press and hold the Last Memory button.
Each time the button is pressed and held,
the selection switches between
“
On Last.M ” and “ Off Last.M ”.
*This function is only available during
playback of an MP3-CD.
MCD-SM45(GB) 2/25/04 8:29 AM Page 16