Sharp AQUOS BD-HP90U - Manual (Page 50)

SETTINGS
Software Update Settings
In this player, the software version can be updated
using either one of the following methods.
Manual Update from Network
Manual Update from USB memory device
Manual Update from Network
This function allows you to perform the update
operation by accessing an Internet connection
manually to check if there is a new firmware version.
NOTE
Make sure that the LAN cable is connected to this player
if a wired Internet connection is made. Make sure that the
wireless router/access point is connected to the Internet if
a wireless Internet connection is made. (See pages 20–21.)
Make sure to perform the communication settings. (See
pages 43–46.)
It may take time to access and download the update
depending on the Internet connection and other factors. •
•
•
CAUTION
While downloading or updating the software, do not
remove the LAN cable when it is used for the Internet
connection, do not unplug the AC cord, do not remove any
cables from the router/access point and do not turn off the
router/access point. •
Press HOME to display the menu screen.
Press a/b to select “Settings”, then press d or
ENTER .
Press a/b to select “Software Update
Settings”, then press d or ENTER.
Press d or ENTER to move to the menu to the
right.
Press a/b to select “Network”, then press
ENTER .
•
•
1
2
3
4
5
During access to the network and checking the
latest version of firmware, “Accessing” blinks.
The current version of this unit software and the latest
version of the update file on the network are displayed
when latest version of firmware has been found.
To update this player software with update file, select
“Yes”, and go to step 7.
Latest version of firmware has been found.
Firmware update is available.
Proceed with update?
If “Yes” will be selected, version update will start.
Current Version :
Latest Version : xxxxxxxxxx
yyyyyyyyyy
Yes
No
If the firmware has already been updated to the latest
version, the following message appears.
Present version of firmware is latest version.
You do not need to update.
Version : xxxxxxxxxx
OK
If the Internet connection has failed, an error message
appears.
Retry the update after checking if the broadband
Internet connection (pages 20–21) and communication
settings (pages 43–46) are performed properly.
Press ENTER to start updating.
Downloading latest firmware…
Version : yyyyyyyyyy
30%
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
If the update has failed, an error message appears.
Retry the update after checking if the broadband
Internet connection (pages 20–21) and communication
settings (pages 43–46) are performed properly.
Press POWER to turn off the player.
6
•
•
•
7
8
•
9
48