Sharp AQUOS BD-HP90U - Manual (Page 18)

Removing and replacing the
terminal cover
Before connecting the player to a TV, the AC adapter,
etc., remove the terminal cover on the bottom of the
player.
Remove the terminal cover on the bottom of the
player.
Make the necessary connections to the player
(pages 18–21, 23).
Replace the terminal cover.
Using the player in a horizontal position
Pass the cables through the center of the
terminal cover.
Replace the terminal cover so the cables pass
through the center of the cover.
1
2
3
E
Using the player in a vertical position
Pass the cables through the end of the terminal
cover.
Replace the terminal cover so the cables pass
through the end of the cover.
See page 17 to install the vertical stand.
E
•
Securing bracket for the HDMI cable
The terminal cover has a securing bracket to prevent
breakage of the HDMI cable. When the HDMI cable is
not passed straight through the securing bracket, the
terminal cover cannot be closed.
16
Player setup location
b Bottom side of the player
b Bottom side of the player
Pass the cables through here.
b Bottom side of the player
Installation example
b Bottom side of the player
Pass the cables through here.
Installation example
Securing bracket for the HDMI cable
b Back of the terminal cover