Sharp AQUOS BD-HP90U - Manual (Page 21)

Audio Connection
Connecting to the Digital Audio Terminal
You can connect audio equipment or the TV to the OPTICAL DIGITAL AUDIO OUT terminal.
For details on digital audio output formats (PCM/bitstream), refer to the digital audio output format selection
table on page 51. •
•
This Player
Audio equipment with a digital audio input terminal
STEPS
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an optical digital cable (commercially available) to the optical digital audio terminals (
1 and 2).
1
2
After connecting
If necessary, perform the Audio Video Settings. (Page 40)
Prepare the desired disc or content and start playback. (Pages 27–33) •
•
Amplifier
When using OPTICAL DIGITAL AUDIO OUT,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
NOTE:
7.1 ch Audio is available via the HDMI terminal.
•
NOTE
Digital audio cannot be copied from the
OPTICAL DIGITAL AUDIO OUT terminal. •
TV
Optical digital cable
(commercially available)
To OPTICAL DIGITAL
AUDIO OUT terminal 1
To OPTICAL DIGITAL
AUDIO IN terminal 2
19
Connection